Standard Installation - GE JSP46 Installation Instructions Manual

Installation Instructions

Standard Installation

B
Standard Installation
9/16" Min.
Flat
If the construction of your cabinet cannot
provide a 1/4" flat area back of the countertop
opening, consider changing the counter top to
accomodate this dimension. See alternate
constructions section. If the area is not flat,
excess tension may be applied to the glass
causing breakage and voiding the warranty.
Center the 30" wide opening over the
B1
adjacent cabinets and mark with a
straight edge.
Using a straight edge mark the back line
B2
at 23-3/16" from the front edge of the
counter.
1/4" Min.
Flat
23-3/16"
29 -15/16 to 30 -1/16"
Smooth Cut
Wall
25"Typically
9/16" Min.
Flat
Be careful not to damage the adjacent
B3
cabinets while cutting the countertop.
Use a hand or saber saw to make
straight smooth cuts.
Remove countertop raised edge. If
B4
incorporated (See illustration on page 5).
6
FLAT AREA
R
1/4"
36"