Primary Ide Master Submenu - Dell Dimension L Series Reference And Troubleshooting Manual

support.dell.com
Table B-6. IDE Configuration Submenu Options (continued)
Option Function
Primary IDE Identifies the first drive attached to the primary EIDE inter-
Master face, usually the boot hard-disk drive. Refer to "Primary IDE
Master Submenu" found later in this appendix.
Primary IDE Slave Identifies the second drive attached to the primary EIDE
interface, if there is one. The format of this submenu is the
same as the one described in "Primary IDE Master
Submenu" found later in this appendix.
Secondary IDE Identifies the first drive attached to the secondary EIDE
Master interface, usually a CD-ROM
menu is the same as the one described in "Primary IDE
Master Submenu" found later in this appendix.
Secondary IDE Identifies the second drive attached to the secondary EIDE
Slave interface, usually a Zip or tape drive. The format of this sub-
menu is the same as the one described in "Primary IDE
Master Submenu" found later in this appendix.
NOTE: The Glossary in the system Help defines abbreviations and acronyms.

Primary IDE Master Submenu

Figure B-6. Primary IDE Master Submenu
k drive. Refer to "Primary IDE
CD-ROM drive. The format of this sub-
ppendix.
System Setup Program B-9 9