Dell Dimension L Series Reference And Troubleshooting Manual page 76

5-8 8 Dell Dimension L Series Systems Reference and Troubleshooting Guide
4. Select Boot From CD-ROM, and then press <Enter>.
If you wait too long to make this selection, the computer automatically boots
from the hard drive. If this occurs, allow the computer to boot completely, and
then restart it and try again.
5. Select Start Windows Setup from CD-ROM indows Setup from CD-ROM, and then press <Enter>
6. Press <Enter> again.
7 . Select Continue Setup and replace your current operating system
press <Enter>.
8. Press <Enter> again.
ScanDisk automatically starts and checks your hard-disk drive.
9. Click Next in the Welcome to Windows Me window.
10. 0. Select the directory in which Windows resides.
If C:\WINDOWS (recommended) is displayed, select it, and then click Next.
If C:\WINDOWS.000 (recommended) is displayed, click Other, change
C:\WINDOWS.000 to C:\WINDOWS, and then click Next.
11. Ensure that Typical ypical is selected, and then click Next.
12. Specify a computer name, workgroup, and computer description, if desired, and
then click Next.
13. Select a country in the Country/Region window, and then click Next.
14. Specify a time zone in the zone in the Establish Time Zone window, and then click Next.
15. Click Finish.
Windows Setup installs necessary files, and then restarts the system.
16. Select Boot From Hard Drive, and then press <Enter>.
17 . In the User Information window, type your name and, if applicable, company
name, and then click Next.
The Name field must be completed; the Company Name field is optional.
The License Agreement window appears.
18. Click I accept the Agreement, and then click Next.
19. Type the Windows product key in the fields provided, and then click Next.
The product key is the bar code number found on the Microsoft Windows label,
which is located on the side of your system.
g system, and then
ble, company
Microsoft Windows label,