Setting Tone Options; Setting Navigation Instructions; Viewing Technical Gps Information - Magellan Maestro 4040 User Manual

(The Simulate button is presently not active.)
4. Tap Back arrow to record the changes and exit.
Setting Tone Options
Provides a way of selecting the tone used to announce arrival at a maneuver or destination.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Tone Options.
3. Select Bell, Chime or Beep.
4. Tap Save to record the changes and exit.
Setting Navigation Instructions
Set which instructions will be announced using text-to-speech.
1. From page 2 of the Main Menu, tap User Options.
2. Tap Navigation Instruction.
3. Tap Announce street name to check or uncheck. When checked, street names will be
an nou need usi ng text-to-speech.
Tap Announce exit ramp name to check or uncheck. When checked, exit ramp names will be
announced using text-to-speech
4. Tap Save to record the changes and exit.
Viewing Technical GPS Information
This screen provides technical information about the satellites being used to compute the GPS
position.
1. From page 2 of the Main Menu, tap User Options.
2. Tap GPS Options.
3. Tap GPS Status.
PRN: pseudo random number that
identifies the satell ite
AZ: Azimuth of the satellite
EL: Satellite elevation
SNR: Satellite signal-to-noise ratio
TTFF: Time to First Fix (in seconds)
4. Tap Back arrow to exit.
MFG GPS Status
User Options 60