Configuration; Initial Connection To The Router; Connect Via Usb - D-Link DWR-932 User Manual

Section 2 - Installation

Configuration

This section will show you how to configure your new D-Link mobile router using the configuration utility that can be obtained through a software
interface or a web-based user interface.

Initial Connection to the Router

When configuring the router for the first time, you will need to establish a direct connection with the router in order to access the web-based
configuration utility. This can be done using the included USB cable, or by connecting wirelessly to the DWR-932, as described in "Connect via
Wi-Fi" on page 10. Once you have configured your router, you will be able to connect using the Wi-Fi settings that you have specified in the
configuration process. Ensure that the router is powered on and has sufficient battery power before commencing the setup process.

Connect via USB

To connect to the router via USB, plug the provided Micro-USB cable into the Micro-USB port on the bottom of the router, and plug the other end
into an available USB port on your computer. Your router is now ready for configuration, please refer to the "Configuration Utility" on page 12
to continue the setup process.
D-Link DWR-932 User Manual 9