Sony HD-X1 Service Manual page 83

Pin No. Pin Name
82, 83
OG8, OG9
84, 85 QR0, QR1
86 to 90
OR2 to OR6
91
VSS
92
OVDDE2
93 to 95 OR7 to OR9
96
QV
97
QH
98
QDE
99 QCLK
100
VDDI
101
VSS
102
EXCLK
103
OVDDE3
104
PH1
105
N.C.
106
AVS1
107
AVD1
108
CPO
109 N.C.
110
VCI
111
AVS2
112
AVD2
113
N.C.
114
PH2
115
PLLEN
116
OVDDE4
117
DCLK
118
OVSS1
119
DCLKP
120 VDDI
I/O
O Video signal (green) output to the HDMI panellink cinema transmitter
O Video signal (red) output terminal Not used
O Video signal (red) output to the HDMI panellink cinema transmitter
- Ground terminal
- Power supply terminal (+3.3V) (for I/O)
O Video signal (red) output to the HDMI panellink cinema transmitter
O Vertical sync signal output to the HDMI panellink cinema transmitter
O Horizontal sync signal output to the HDMI panellink cinema transmitter
O Dsata enable signal output to the HDMI panellink cinema transmitter
O Pixel clock signal output to the HDMI panellink cinema transmitter
- Power supply terminal (+2.5V) (for core)
- Ground terminal
Pixel clock signal input terminal for external PLL mode
I
In internal PLL miode, must be fixed at "L" Fixed at "L" in this set
- Power supply terminal (+3.3V) (for I/O)
Phase comparate signal output terminal for external PLL (reference)
O
In internal PLL miode, must be not connected not connect in this set
- Not used
- Ground terminal (for PLL)
- Power supply terminal (+3.3V) (for PLL)
O Charge pump output terminal for internal PLL mode
- Not used
I VCO input terminal for internal PLL mode
- Ground terminal (for PLL)
- Power supply terminal (+3.3V) (for PLL)
- Not used
Phase comparate signal output terminal for external PLL mode (feedback)
O
In internal PLL miode, must be not connected not connect in this set
Selection terminal for internal PLL mode/external PLL mode
I
"L": internal PLL mode, "H": external PLL mode Fixed at "H" in this set
- Power supply terminal (+3.3V) (for I/O)
I System clock input (27 MHz) from the progressive scan converter
- Ground terminal
I Setting terminal for DCLK polarity
- Power supply terminal (+2.5V) (for core)
Description
HCD-X1
83