Intercom Call Transfer - AT&T E2903B User Manual

PHONE 00:05:30
TRANSFER TO:
INTERCOM
CALL TRANSFERRED
NOTES:
1. Before the intercom call is
answered, you can cancel
the transfer and return to
the external call by pressing
OFF/ , PHONE/
CLEAR
or INT.
2. If the destination handset
does not answer the intercom
call within 100 seconds,
or if the other handset is
in the directory or call log
mode, or out of range, the
originating handset will
show NOT AVAILABLE on
its screen and will automat-
ically return to the external
call.
Telephone operation

Intercom call transfer

Use the intercom feature to transfer an external
call from one handset to another.
1. During a conversation with an external call, press
INT. The external call is automatically placed on
hold. The originating handset's screen will show
TRANSFER TO:.
2. Enter the handset number of the destination handset (1,
2 or 3). The display will show CALLING HANDSET X.
The destination handset will ring, and its screen
will show HANDSET X IS CALLING.
3. On the ringing destination handset, press
PHONE
(0-9, * or #) to answer the intercom call. You can now
talk without the external caller hearing the conversation.
NOTES:
•
You can alternate between the intercom call and the outside
call by pressing INT on the originating handset. The display
will alternate between INTERCOM and OUTSIDE to indicate
which party is active.
•
You can end the intercom call and return to the external call
by pressing
•
The person on the destination handset can join the external
call by pressing
the outside call.
•
To allow the person on the destination handset to join
the external call, press and hold INT on the originating
,
FLASH
handset.
4. Complete the transfer by pressing
on the originating handset or placing that handset
in the telephone base or charger. The originating
handset's screen will show CALL TRANSFERRED
and the other handset will automatically be con-
nected to the external call.
, INT, SPEAKER, or any dial pad key
/FLASH
PHONE/
FLASH
PHONE/
FLASH
17
on the originating handset.
,
connecting both handsets to
OFF
/CLEAR