Makita 6207D Series Technical Information page 11

R
epair
4. Assemble compression spring 2 to lock lever as illustrated in Fig. 7B. Pulling mode change lever
to the another side of housing L along the surface of gear assembly, insert the lock lever into mode change lever
as illustrated in Fig 7C.
5. Pushing lock lever, slide mode change lever to the another side of housing L, and assemble housing R to
housing L by fastening screws as illustrated in Fig 7D.
Pushing lock lever,
slide mode change
lever to the housing
L side.
Compression spring 2
Locl lever
Housing L
Tapping screw bind
PT 3x16 : 9 pcs.
Housing L
Fig. 7B
Pull mode change lever
to the another side of housing L
in order to assemble lock lever to it.
Fig 7C
Pan head
screw M4 x 22 : 1 pc.
Fig 7D
P 11 / 13