Running Diagnostics - Compaq ProLiant 6000 Maintenance And Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
3-28 Diagnostic Tools
6. If you do not have access to the password, you must disable the power-on password
7. When required by Diagnostics, install a loopback plug (Part Number 142054-001).
8. Run the latest version of Diagnostics.

Running Diagnostics

There are two ways to access the utilities:
Accessing the utilities from the system partition:
1. Reboot the server by pressing the Ctrl+Alt+Delete keys.
2. Press F10 when the following prompt appears at the top of the screen during POST.
IMPORTANT: The text appears for only two seconds. If you do not press
F10 during this time, you must reboot the server.
3. From the System Configuration Main Menu, select Diagnostics and Utilities.
4. Press the Enter key to continue.
5. After a short pause, the Server Health Log menu displays with a list of system errors.
6. The Diagnostics Utility prompts you and suggests corrective action.
by using the Password Disable switch on the system board.
From the System Partition.
From diskette. A diskette can be created from the SmartStart CD.
Press "F10" for System Partition Utilities.
If there are errors detected in your Server Health Log, the Diagnostics Utility
automatically displays the following screen message:
CAUTION: Errors have been detected in you Server Health
Log. Diags will now identify your system hardware.
If there is more than one error, press the Spare Bar to select the error you want to
correct. Then press Enter.