Procedure - LG GB230 Service Manual

1. Connect as Fig 6-2(RS232 serial cable is connected between COM port of PC and MON port of TEST JIG,
in general)
2. Set the Power Supply 4.0V
rd th
3. Set the 3 , 4 of DIP SW ON state always
4. Press the Phone power key, if the Remote ON is used, 1

12.4 Procedure

1. Copy the file to C:\Cm_Gsm_Multi
2. Copy the files of((Windows XXX)MFCD DLL, vsflex7l_ocx_regist to C:\Cm_Gsm_Multi\dll,ocx
3. Select MFCD DLL of your computer OS
4. Click on "vsflex7l_ocx_regist"
5. Click on "Multi_HK reg"
6. Connect as Fig 11-2 (RS232 serial cable is connected between COM port of PC, in general.)
. Run HK_40exe to start calibration.
7
8 Click " Logic Operation" of "SETTING" menu bar
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
st
ON state
- 137 -
12. AUTO CALIBRATION
LGE Internal Use Only