Removal and Replacement Procedures
7. Unscrew the VGA cable.
8. Remove the two screw locks from the VGA cable connector.
9. Remove the three screws securing the controller board to the metal controller cover.
Figure 3-13: Removing screws from metal controller cover
10. Remove the controller board from the metal controller cover.
To replace the metal controller cover and controller board, reverse the above procedure.
HP TFT5110R Maintenance and Service Guide
3-13
HP CONFIDENTIAL Codename: Pug Part Number: 292490-001 Last Saved On: 10/23/02 10:13 AM