Removing The Cable Management Arm Assembly - HP TFT5110R Maintenance And Service Manual

Rackmount flat panel monitor
Hide thumbs Also See for TFT5110R:
Table of Contents

Advertisement

Removing the Cable Management Arm Assembly

To remove the cable management arm assembly:
1. Disconnect all cables from their source.
2. Unthread the cables from the cable management arm.
3. Remove the two screws securing the cable management arm to the rear of the metal tray.
Figure 3-15: Removing the cable management arm
4. Remove the screw (1) securing the cable management arm brace to the rail
(on each side), and remove the brace assembly (2).
Figure 3-16: Removing the cable management arm brace
HP TFT5110R Maintenance and Service Guide
HP CONFIDENTIAL Codename: Pug Part Number: 292490-001 Last Saved On: 10/23/02 10:13 AM
1
Removal and Replacement Procedures
2
3-15

Advertisement

Table of Contents
loading

Table of Contents