Setting The Cooking Time & Power Level - Kenwood MW320 Instructions Manual

2255 A5 MW320 micro doc
SETTING THE COOKING TIME & POWER LEVEL
Press the MICRO pad.
The display will show : 0 and 1S
This is the 1st Stage
(1S) indicator
Press the TIME pads as shown in setting
the CLOCK to set the required cooking
time.
This example shows the cooking
time has been set for 2 minutes
Press the POWER pad to set the power
level. The oven automatically cooks on a
high power unless it has been set
otherwise.
The POWER pad has been
pressed twice to set the power
level at 80%
Press Once
Press Twice - 80%
Press 3 times - 60%
Press 4 times - 40%
Press 5 times - 20% - Low Power
The power level can be checked during
the cooking cycle by pressing the
POWER level pad.
The power level will be displayed
for 5 seconds
Press the START pad to commence
cooking. The light comes on and you will
hear the oven sound. The oven will bleep
3 times at the end of the cooking time. If
you wish to stop cooking at any point,
press the door opening button.
The example shows 1 minute and
14 seconds
10/12/01 12:19 pm Page 7
- 100% - High Power
7
1 10 1
min sec sec