Kenwood MW320 Instructions Manual page 6

2255 A5 MW320 micro doc
Switch on the supply.
You will see:
Press the CLOCK pad. A bleep will sound. Press the CLEAR pad.
A bleep will sound, then enter the time of day.
Use the 10 min and 1 min pads to set the hours.
Use the 10 sec and 1 sec pads to set the minutes.
Press CLOCK to confirm the time set.
The display should now show the correct time of day. If not,
press CLOCK then CLEAR and try again.
Example:
The two dots will flash every other second.
The time of day can be checked during a cooking cycle by pressing the
CLOCK pad. The time will be displayed for 5 seconds.
10/12/01 12:19 pm Page 6
SETTING & RESETTING THE CLOCK
10 1 10
min min sec
6
1
sec