Subscribe to Our Youtube Channel
Related Manuals for Black Box LES1204A-3G
Summary of Contents for Black Box LES1204A-3G
- Page 1 LES1204A-3G Remote Console Manager with GSM Modem QS Guide Quick Start Guide This Quick Start Guide helps you through installation, configuration, and local operation. For more details, refer to the user manual on CD-ROM.
- Page 2 Remote Console Manager (LES1204A-3G) Quick Start Guide Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Cisco is a registered trademark of Cisco Technology, Inc. Linux is a registered trademark of Linus Torvalds.
- Page 3 Universal input 12-VDC power pack Step 2: Connect the hardware. NOTE: The LES1204A-3G Remote Console Manager has an internal 3G GSM cellular modem. Your carrier will provide you with a SIM card to activate your GSM cellular modem plan. The SIM card must be installed in the Remote Console Manager before applying power.
- Page 4 Remote Console Manager (LES1204A-3G) Quick Start Guide NOTE: On applying power, the “SIM” LED on top of the Remote Console Manager will go on solid, indicating that the SIM has been inserted and detected. Step 3: Set up the Remote Console Manager.
- Page 5 Remote Console Manager (LES1204A-3G) Quick Start Guide To assign your Remote Console Manager a static IP address or to permanently enable DHCP, select “System: IP” then “Network Interface” and check “DHCP” or “Static” for configuration method. By default, only HTTPS and SSH access is enabled to the Remote Console Manager itself.
- Page 6 Remote Console Manager (LES1204A-3G) Quick Start Guide NOTE: Port 1 is configured by default in Local Console (modem) mode. Use the crossover-pinned DB9F-RJ-45 adapter and UTP cable to connect to a terminal emulator application on your PC’s serial COM port. If you plan to use out-of-band (OoB) dial-in access, connect this serial port to an external modem as covered in detail in the user manual on the CD-ROM.
- Page 7 Remote Console Manager (LES1204A-3G) Quick Start Guide • For each new user, select “Serial & Network: Users & Groups” and click “Add User.” • Enter a username and enter and confirm a password. • Select one or multiple group memberships for the user. To grant limited access to the management console, check the “users”...
- Page 8 Remote Console Manager (LES1204A-3G) Quick Start Guide Step 6: Establish connection to the cellular carrier. Figure 7. System: Dial screen. • Select “Internal Cellular Modem” on the “System: Dial” menu and check Enable Dial-Out • Enter the carrier’s APN e.g. for AT&T (USA) simply enter “i2gold”, for T- Mobile (USA) enter “epc.tmobile.com”, for InterNode (Aust) enter...
- Page 9 Remote Console Manager (LES1204A-3G) Quick Start Guide Figure 8. Status: Statistics screen. Note: An RSSI of -99 dbm to –90 dbm is Weak Coverage, -89 dbm to – 70 dbm is Medium, and -69 dbm or greater is Strong Step 7: Out of band access.
- Page 10 Remote Console Manager (LES1204A-3G) Quick Start Guide 192.168.x.x). For an inbound OOB connection with such a plan, you will need to set up a VPN (see the user‘s manual for details). Note: In out of band access mode, the internal cellular modem will continually stay connected.
- Page 11 Remote Console Manager (LES1204A-3G) Quick Start Guide NOTE: On the CD-ROM, you will find the SDT Connector software tool. Once you have configured the Remote Console Manager, this tool provides you with secure, point-and-click access to the Remote Console Manager and all the attached devices.
- Page 12 LES1204A-3G QSG, rev. 3...
Need help?
Do you have a question about the LES1204A-3G and is the answer not in the manual?
Questions and answers