Ambient Sensor (Auto A/C Model) - Subaru LEGACY 2004 Service Manual

Hide thumbs Also See for LEGACY 2004:

Table of Contents

Ambient Sensor (Auto A/C Model)

HVAC SYSTEM (HEATER, VENTILATOR AND A/C)

21.Ambient Sensor (Auto A/C

1) Open the front hood.

2) Disconnect the ground cable from battery.

3) Disconnect the ambient sensor connector.

4) Remove the ambient sensor from the radiator

lower panel.

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

<Ref. to AC(diag)-30, AMBIENT SENSOR, Diag-

nostic Procedure for Sensors.>

Table of Contents