Step 3 - Setup The Drive - Maxtor OneTouch 3 User Manual

MAXTOR ONETOUCH III TURBO EDITION WINDOWS INSTALLATION

Step 3 - Setup the Drive

1. If the Welcome to Maxtor OneTouch Setup screen is still
visible, click Cancel to close it. Your computer may
require a restart to complete the hardware installation.
2. The Maxtor OneTouch III FireWire 800 drive is shipped with a
Macintosh file system. The Windows XP and Windows 2000
operating systems use an NTFS file structure. Your drive
must be re-formatted for the NTFS file system in order to
work properly with your Windows operating system. The
Format Drive window will appear and you will have the
opportunity to format your drive with the NTFS file system.
This is necessary for Windows 2000 and XP users.
PAGE 43
3. Click Format.
Your new drive will appear in the same way as your other drives,
with a letter assigned to it by the operating system. The assigned
letter will vary depending upon the number of other drives
connected to your computer.
4. Push the OneTouch button. The Retrospect registration
screen will appear.