Maxtor U01E200 User Manual

Maxtor u01e200: user guide

Advertisement

Quick Links

Pre-Installation:

Thank You

Thank you for selecting a Maxtor Personal Storage product. Please follow
these instructions to take full advantage of its features.

Handling Precautions

If these handling precautions are not followed, damage to the Personal
Storage product may result-which may void your product warranty. Please
see the warranty section for additional information.
• DO NOT open the product
• Opening the product will void the warranty DO NOT bump, jar, drop, or
move this device while in operation as it may result in loss of data
• DO NOT stack the Personal Storage 3200
• DO NOT set or operate the Personal Storage 3200 on its side without
first being connected to its vertical stand
• DO NOT disconnect any cables while copying files without properly
unplugging or dismounting the device via your operating system - as
this can result in data loss and possible damage to the internal hard
drive
• DO NOT spill any liquids or drinks on the product - as they will damage
the internal electronics
Hardware and Operating System Requirements for
Windows PC
• Pentium III-class equivalent processor or later
• Windows 2000 or XP
• 128MB RAM or more as required by operating system
NOTE: Macintosh Systems are NOT supported with this product.
Personal Storage 3200 User's Guide

Kit Components

The Maxtor Personal Storage 3200 comes complete with components shown
here. Please familiarize yourself with each of these items prior to installation.
USB Backward Compatibility The Maxtor Personal Storage 3200 is
backward compatible and can be used with current computer syst
built in USB 1.1 ports. If your computer does not have USB 2.0 support built
in, a USB 2.0 PCI adapter card is required to achieve the USB 2.0 data
transfer rates.
Windows 2000 / XP
Maxtor has completely pre
large NTFS partition. After you connect the drive to your computer (see Part
3 Hardware - Installation for more information), Windows will detect the
"USB Mass Storage Device" and install the drivers for it. Allow up to two
minutes for your computer to recognize the drive. Restart your system. Your
drive is now ready to use.
www.maxtor.com
Personal Storage 3200
Power Adapter
USB Interface Cable

Windows PC Setup:

pared your new personal storage 3200 with one
ems with

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the U01E200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Maxtor U01E200

  • Page 1: Thank You

    Pre-Installation: Thank You Thank you for selecting a Maxtor Personal Storage product. Please follow these instructions to take full advantage of its features. Handling Precautions If these handling precautions are not followed, damage to the Personal Storage product may result-which may void your product warranty. Please see the warranty section for additional information.
  • Page 2: Hardware Installation

    Hardware Installation: To connect your new Maxtor personal storage 3200 to your computer, please follow these simple steps. If these steps are not performed in order, the Personal Storage 3200 may not function properly. Connect To Vertical Stand Securely slide and connect the Personal Storage 3200 drive to the vertical stand.
  • Page 3 5. I’m having data transfer performance problems with my USB 2.0 adapter card. Maxtor drives will run as fast as the host adapter card will allow (up to the maximum burst rate of 480 Mb per second). If you are having performance issues, make sure the card’s drivers are the most current...

This manual is also suitable for:

Personal storage 3200

Table of Contents