Panasonic DMR-HWT250 Operating Instructions Manual page 12

Getting started
Control reference guide
Main unit
Display

USB memory
Pull to flip down
the front panel.
1 Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
2 Start play
3 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
4 USB port
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
12
SQT0816
Display
  
1 Drive (HDD) indicator
2 Copying indicator
3 USB port indicator
4 Remote control signal indicator
5 Timer recording indicator
6 Main display section indicator
7 Playback indicator
8 Recording indicator
1 2 3
USB
COPY
HDD
6
This indicator lights up when the timer
recording standby is activated.
- Current time
- Playback counter
- Various messages (
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
4 5
PLAY
7 8
83), etc.