Introduction; Description; Specifications; Order Information - C-Dax C-DIT300 Owner's Manual

C-Dax thanks you for your purchase of an advanced spreader from C-Dax Ltd. C-Dax Ltd is committed to
providing you, the farmer, with quality applicating systems.
The C-Dax C-DIT300 is a ground-driven spreader designed for application of pelleted fertilisers. It can also be
used for application of other products such as grass seed and magnesium oxide. The uniquely designed 300-
litre translucent non-corrosive polyethylene hopper is specially profiled for good product flow and ease of
filling. The convenient flexible polypropylene cover is easy to remove, install and store if not required. A high-
quality stainless steel agitator and shutter ensures even flow of product to the spinner. A unique spinner
design ensures wide, even spread of product over 180 degrees (Urea). The drive train uses high quality steel
and a double sealed self-aligning bearing and heavy-duty gearbox for maximum durability. While seated, the
operator has access to the control handle. This handle allows disengagement and engagement of the clutch
and setting of product feed rate all in one motion. Also standard are mudguards, swivel tow-hitch and a fully
shrouded polyethylene front deflector to further protect the operator from product being thrown off the spinner.
Specifications: All Models Unless Stated
(Specifications subject to change without notice)
Dry Weight
Dimensions
Capacity
Drive
Wheels
Tyre Pressure
Clutch
Control
Agitator
Spinner
Hopper
Hopper Cover
Frame
Gearbox
Gearbox oil
Axle Bearings
Clutch bearing
Axle grease
Application Rate
Spread width
Towing speed

Order Information

Standard C-DIT300 model

INTRODUCTION

75 Kg
W1430mm, H1200mm, L1700mm
W1450mm (Wide wheel models)
300 litre (250Kg Urea)
Ground driven (single wheel)
18x950x8 Chunky turf tyres
12 PSI
Lever operated mechanical clutch
Adjustable stainless steel slide with index handle
Mechanical arm, stainless steel
Galvanised steel with three-position adjustable vanes
Non-corrosive polyethylene, ergonomically designed for ease of filling and inspection
Lightweight polypropylene fabric
Galvanised steel
Heavy duty with double sealed bearings
400ml SAE30
Sealed ball races
Self-lubricating Vesconite bearing
General Purpose
140Kg per hectare @ 10 kph (nominal, Urea)
18M (nominal, Urea @ 15 Kph)
15 Kph (Maximum recommended)

DESCRIPTION

NZ
P/N 3003
5
UK EXPORT
3010