Sony CDP-CX355 Service Manual page 27

Sensor Adjustment
With the power ON, while pressing the GROUP 4 and ·
1.
buttons, press the +100 button to enter the mechanism
adjustment mode.
2. Press the GROUP 1 button to operate the loading mechanism,
and continue pressing until the disc table locks. (Fig-3)
3. Loosen the fixing screw, move the holder (TABLE SENSOR)
slightly, and when the LED (green) of the PLAY button
switches to the LED (orange) of the PAUSE button (or vice
versa), secure the holder (TABLE SENSOR). (Fig-4)
4. Moving the disc table right and left with a hand after the screw
is fixed, the table will move by the play of a disc table. If the
LEDs light up alternately, the adjustment will be performed
correctly. (Fig-4)
Linked with P indicator
Linked with · indicator
PLAY indicator PAUSE indicator
GROUP1
PAUSE button
GROUP4
PLAY button
At this position,this
part will be locked.
FIg-3
Holder (table sensor)
Fixed screws
Table assembly
Swing
FIg-4
CDP-CX355
27