Resetting The Total Lamp Timer - Sharp XG-NV5XB Service Manual

XG-NV5XB

RESETTING THE TOTAL LAMP TIMER

When the lamp has been replaced, reset the total lamp timer in the following steps.
Resetting procedure
1. While holding down the "ENTER", "ADJ."" and "ADJ.|" keys on the set at the same time, turn on the main
power switch (located side the AC inlet).
2. Now the total lamp timer is reset to zero. "000H" appears on the screen.
The projector will not operate after the lamp timer exceeds 1500hrs. If the lamp re-
placement indicator is red, and the projector will not power on, replace the lamp and
reset the lamp timer.
LAMP TEMP.
POWER
+
I
ON
MUTE
VOLUME
–
O
OFF
BLACK
MENU
SCREEN
B
INPUT
SELECT
√
FREEZE AUTO SYNC
KEYSTONE ENLARGE
ENTER
ENTER ADJ."
18
IrCOM
ADJ.|