Sharp XG-NV5XB Service Manual page 16

XG-NV5XB
4. Removing the Power/Ballast unit assembly
4-1. Remove the Power/Ballast unit assembly lock screw.
4-2. Remove the two lamp socket holder lock screws and take out the holder.
4-3. Disconnect the connector (BA) from the ballast unit.
4-4. Remove the (FG) lead lock screw.
4-5. Lift the Power/Ballast unit assembly off the position.
4-4
4-1
4-2
(FG)
Power/Ballast Unit Ass'y
4-5
4-3
(BA)
16