Resetting The Total Lamp Timer - Sharp XG-NV2SB Service Manual

XG-NV2SB

RESETTING THE TOTAL LAMP TIMER

When the lamp has been replaced, reset the total lamp timer in the following steps.
Resetting procedure
1. While holding down the "ENTER", "ADJ."" and "ADJ.|" keys on the set at the same time, turn on the main
power switch (located above the AC inlet).
2. Now the total lamp timer is reset to zero. "000H" appears on the screen.
POWER LAMP TEMP
ON/OFF MUTE
INPUT SELECT
IN
BLACK
MENU
SCREEN
MN MN
ENTER
IN
ENTER ADJ."
18
VOL
ADJ.|