Sharp LC-26D43U Service Manual page 19

(2) . Process mode
Adjustment item Adjustment conditions
Process mode
1
(3 ) Composite N358 signal/tuner adjustment
Adjustment conditions
Adjustment item
1 Setting N358 signal
US-10ch
2 Automatic adjust-
ment execution
(4) 15K COMPONENT signal adjustment
Adjustment conditions
Adjustment item
1 Setting 480i signal
2 Automatic adjust-
ment execution
(5) Component 33Ksignal adjustment
Adjustment item Adjustment conditions
1 Setting 1080i signal
2 Automatic adjust-
ment execution
Adjustment procedure
Enter the process adjustment mode using the process adjustment remote controller
Adjustment procedure
Feed the N358 color bar signal(75%)to VIDEO 1 Input
Feed the RF signal (by use of US-10CH) to TUNER.
[Video input signal]
75% Color saturation
100% white
Move the cursor to [ N358 ADJ] and press the [ENTER] key.
When [ N358 ADJ OK] appears,the adjustment is complete.
Adjustment procedure
Feed the 100% color Bar signal to VIDEO1 COMPONENT input
100% Color saturation
100% white
Move the cursor t0 [ COMP 15K ALL ADJ] and press the [ENTER] key. .
When [ COMP 15K ALL ADJ OK] appears, the adjustment is complete.
Feed the 100% color Bar signal to VIDEO1 CIMPONENT input
100% Color saturation
100% white
Move the cursor to [ HDTV ADJ ] and press the [ENTER] key.
When [ HDTV ADJ OK] appears, the adjustment is complete.
19
[US-10ch]
0% black 100% white
480i
100% color bar
0% black
Adjustment procedure
1080i
100% color bar
0% black
LC-26D43U