Table of Contents
Advertisement
LC-26D43U
6. A failure in the process will trigger the upgrade failure screen.The word "NG" changes to red for the item failed.
NOTE: In the event of a failure,repeat the upgrading process.If the process repeatedly fails, it is likely that the hardware is troubled.
7. Upon completion of the whole process,the set will restart autowatically.
8. Unplug the AC cord and remove the USB Memory for version upgrade.
9. Now the software versin upgrade is complete.
NOTE: When you are done with the software version upgrade,start the set,go to the top page of the adjustment process screen and check the mon-
itor microprocessor software version information and panel size information.
2.4. LCD TV Adjustment item
1.MICON SOFTWARE Writing
(1) Monitor Micon and Main Micon software writing (Main PWB : QPWBXE001WJZZ)
Adjustment item Adjustment conditions
1
Software writing
Inspection mode
file version checking
2. Signal adjustment
(1) Checking the Device
Before starting the adjustment,make sure the adjustment tool and signal generator are set for Sharp LCD US.
Checking the signal generator level adjustment (Set to th standard level)
Composite signal
15K component signal
33K component signal
Analog RGB signal
UPGRADE FAILURE
MONITOR
Model err
OLD Version
NEW Version
Connect the tool by using write MAIN soft to P9301 (TL9301,TL9302,TL9310 - TL9355,TL9357,
TL9359,TL9375,TL9378,TL9380 - TL9383) that is mounted on the main PWB,and insert USB
Memory by using MONITOR MICON to main PWB.MONITOR connect to TL8123、TL8124 that
denoted figure. Load stated voltage to MAIN PWB, write the lastest version MAIN SOFT to
IC8451, and write the MONITOR MICON SOFT to IC2002, after all completed,turn off the AC
power.
[NOTE]
When the USB MEMORY can't insert to main PWB or read out is error,MAIN Miro software
must be writed again.
:
0.714 Vp-p ± 0.02
:
Y LEVEL
:
0.714 Vp-p ± 0.02
Pb, Pr LEVEL
:
0.7 Vp-p ± 0.02 Vp-p
:
Y LEVEL
:
0.7 Vp-p ± 0.02 Vp-p
Pb, Pr LEVEL
:
0.7 Vp-p ± 0.02 Vp-p
:
RGB LEVEL
:
0.7 Vp-p ± 0.02 Vp-p
18
NG
0.95
0.95
Adjustment procedure
(from pedestal to white)
(from pedestal to white)
(from pedestal to white)
(from pedestal to white)
Hide quick links:
Advertisement
Table of Contents
