Removing And Reinstalling The Main Parts - Sharp CD-C605H Service Manual

CP-C605H
STEP REMOVAL
1 Speaker 1. Net Frame ............... (A1) x1
2. Duct Panel .............. (A2) x1
3. Screw ...................... (A3) x4
(A3)x4
(A1)x1
ø4x12mm
Net Frame

REMOVING AND REINSTALLING THE MAIN PARTS

CD MECHANISM SECTION
Perform steps 1, 2, 3, and 11 ~15 of the disassembly method
to remove the CD mechanism.
How to remove the turntable up/down/loading
motor (See Fig. 9-2)
1. Remove the screws (A1) x 2 pcs., to remove the turntable
up/down/loading motor.
How to remove the pickup (See Fig. 9-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x 1 pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1 pc.
3. Remove the pickup.
Note:
After disconnecting the optical pickup connector, wrap the
front end of connector in conductive aluminum foil to prevent
damage to the optical pickup by static electricity.
PROCEDURE
Speaker Box
(A2)x1
Duct Panle
Figure 9-1
FIGURE
9-1
Turntable/Up/
Loading/Down Motor
Motor
PWB
(B1) x2
ø2.6x6mm
– 9 –
Figure 9-2
Stop Washer
(B3)x1
Shaft
Gear
(B2) x1
(B4) x1
Figure 9-3
CD-C605H
(A1) x2
ø2.6x5mm
Pickup
CD Mechanism