Table of Contents
Advertisement
HCD-EP707
3. DRAWER
drawer
1 Push the drawer
in the direction of arrow to the chassis
as shown in the figure above.
7
8
arm stopper B
2 Uptilt the right side of the drawer and engage the ditch of the drawer with the claw A .
3 Uptilt the right side of the drawer more and engage the ditch of the drawer with the claw B .
Note: After claws are engaged, put the drawer in holizontal position
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
drawer
6 claw
drawer
ditch
claw A
claw B
5 claw
drawer
bevel gear
4 Meet the drawer and the bevel gear
as shown in the figure above.
Hide quick links:
Advertisement
Table of Contents
