Transfer Mode - Citizen D200 Setting Instructions Manual

The log data are indicated, divided into the first log data and second log data.
Change them over by pushing the (A)(lower right) button.
First log data:
Maximum depth, diving time, month and date of diving, diving No., and diving
start time
Second log data:
Average depth, lowest water temperature, diving finish time
How to call the log data
Push the (B)(Upper right) button, and the recorded log data are indicated in
order from the latest one.
Push the (C) (Upper left) button, and the recorded log data newer than the
one currently indicated are indicated in order from the currently indicated
one.
How to delete all the log data
Push the (B)(Upper right) button and (C) (Upper left) button at the same time
and hold for 2 seconds, and an alarm sound comes out and all the log data and
profile data are deleted.

11. TRANSFER MODE

In this mode, the diving data can be transferred to a personal computer.
In this mode, the data in the watch can be transferred to a personal computer
by using the communication unit and RS-232 straight cable.
Applicable personal computer:
IBM PC/AT or compatible (Some models may not be usable).
Log data to be transferred which contain profile data: Eight data of maximum
depth, average depth, diving time, month and date of diving, diving No.,
diving start time, lowest water temperature, and diving finish time.
Connection:
*Before connecting the cable, be sure to read the "User's manual for the
communication unit AQUALAND GRAPH".
(1) Confirm that the power switch of the personal computer is turned off.
(2) Connect the personal computer and communication unit by the RS-232C
straight cable.
(3) Turn on the power switch of the personal computer, and start the AQUALAND
GRAPH.
(4) Set the watch to the transfer mode, and call the data to be transferred.
(How to call)
If the watch is set to this mode the log data containing the latest profile data
is indicated first.
If the watch is changed from the log mode to the transfer mode, however, the log
data containing the profile data which has been indicated in the log mode is
indicated.
Push the (B)(Upper right) button, and the profile data are indicated in order
from the latest one. Push the (C) (Upper left) button, and the profile data are
indicated in order from the oldest one.
Select the profile data to be transferred to the personal computer by operating
the push buttons.
Return to Table of Contents
Return to Table of Contents