Table of Contents
Advertisement
Quick Links
.
Chapter 1 Introduction .............................................................................. 2
Functions and Features ........................................................................ 2
Packing List ......................................................................................... 4
Chapter 2 Hardware Installation ............................................................... 5
2.1 Panel Layout .................................................................................. 5
2.2 Procedure for Hardware Installation.............................................. 7
Chapter 3 Network Settings and Software Installation............................. 8
3.1 Make Correct Network Settings of Your Computer....................... 8
Chapter 4 Configuring Broadband Router................................................ 9
4.1 Start-up and Log in ...................................................................... 10
4.2 Status............................................................................................ 11
4.3 Wizard .......................................................................................... 12
4.4 Basic Setting ................................................................................ 13
4.5 Forwarding Rules......................................................................... 20
4.6 Security Settings .......................................................................... 24
4.7 Advanced Settings........................................................................ 38
4.8 Toolbox ........................................................................................ 50
Appendix A TCP/IP Configuration for Windows 95/98 ........................ 55
Appendix B FAQ and Troubleshooting.................................................. 61
Reset to factory Default ..................................................................... 61
User's Manual
Table of Contents
1
Advertisement
Table of Contents
Related Manuals for Eusso UIS1400-C8
Summary of Contents for Eusso UIS1400-C8
-
Page 1: Table Of Contents
User’s Manual Table of Contents Chapter 1 Introduction ................2 Functions and Features ................ 2 Packing List ..................4 Chapter 2 Hardware Installation ............... 5 2.1 Panel Layout .................. 5 2.2 Procedure for Hardware Installation..........7 Chapter 3 Network Settings and Software Installation......8 3.1 Make Correct Network Settings of Your Computer....... -
Page 2: Chapter 1 Introduction
Congratulations on your purchase of this outstanding Broadband Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual. - Page 3 correctly. Statistics of WAN Supported Enables you to monitor inbound and outbound packets Security functions Packet filter supported Packet Filter allows you to control access to a network by analyzing the incoming and outgoing packets and letting them pass or halting them based on the IP address of the source and destination.
-
Page 4: Packing List
Other functions UPNP (Universal Plug and Play)Supported The router also supports this function. The applications: X-box, Msn Messenger. Packing List Broadband router unit Installation CD-ROM Power adapter CAT-5 UTP Fast Ethernet cable... -
Page 5: Chapter 2 Hardware Installation
2.1 Panel Layout 2.1.1. Front Panel LED: Function Color Status Description Power POWER Green Power is being applied to this product. indication System M1 is flashed once per second to Status status Orange Blinking indicate system is alive. When system indicators is busy, M2 is lighted. - Page 6 2.1.2. Rear Panel Ports: Port Description Power inlet: AC9V, 1A 9VAC the port where you will connect your cable (or DSL) modem or Ethernet router. the ports where you will connect networked computers and other Port 1-4 devices.
-
Page 7: Procedure For Hardware Installation
2.2 Procedure for Hardware Installation 1. Decide where to place your Broadband Router You can place your Broadband Router on a desk or other flat surface, or you can mount it on a wall. For optimal performance, place your Broadband Router in the center of your office (or your home) in a location that is away from any potential source of interference, such as a metal wall or microwave oven. -
Page 8: Chapter 3 Network Settings And Software Installation
To use this product correctly, you have to properly configure the network settings of your computers and install the attached setup program into your MS Windows platform (Windows 95/98/NT/2000). 3.1 Make Correct Network Settings of Your Computer The default IP address of this product is 192.168.123.254, and the default subnet mask is 255.255.255.0. -
Page 9: Chapter 4 Configuring Broadband Router
This product provides Web based configuration scheme, that is, configuring by your Web browser, such as Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms. -
Page 10: Start-Up And Log In
4.1 Start-up and Log in Activate your browser, and disable the proxy or add the IP address of this product into the exceptions. Then, type this product’s IP address in the Location (for Netscape) or Address (for IE) field and press ENTER. For example: http://192.168.123.254. After the connection is established, you will see the web user interface of this product. -
Page 11: Status
4.2 Status This option provides the function for observing this product’s working status: A. WAN Port Status. If the WAN port is assigned a dynamic IP, there may appear a “Renew” or “Release” button on the Sidenote column. You can click this button to renew or release IP manually. B. -
Page 12: Wizard
4.3 Wizard Setup Wizard will guide you through a basic configuration procedure step by step.Press ”Next >” Setup Wizard - Select WAN Type: For detail settings, please refer to 4.4.1 primary setup. -
Page 13: Basic Setting
4.4 Basic Setting... - Page 14 4.4.1 Primary Setup – WAN Type, Virtual Computers Press “Change”...
- Page 15 This option is primary to enable this product to work properly. The setting items and the web appearance depend on the WAN type. Choose correct WAN type before you start. 1. LAN IP Address: the local IP address of this device. The computers on your network must use the LAN IP address of your product as their Default Gateway.
- Page 16 Set it to zero or enable Auto-reconnect to disable this feature. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The most common MTU value is 1492. 4.4.1.5 PPTP My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you.
- Page 17 4.4.1.7 Virtual Computers Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one mapping of multiple global IP address and local IP address. • Global IP: Enter the global IP address assigned by your ISP. •...
- Page 18 4.4.2 DHCP Server Press “More>>” The settings of a TCP/IP environment include host IP, Subnet Mask, Gateway, and DNS configurations. It is not easy to manually configure all the computers and devices in your network. Fortunately, DHCP Server provides a rather simple approach to handle all these settings. This product supports the function of DHCP server.
- Page 19 IP to your PC. 4.4.4 Change Password You can change Password here. We strongly recommend you to change the system password for security reason.
-
Page 20: Forwarding Rules
4.5 Forwarding Rules 4.5.1 Virtual Server... - Page 21 This product’s NAT firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping. A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP.
- Page 22 4.5.2 Special AP Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony, etc. Because of the firewall function, these applications cannot work with a pure NAT router. The Special Applications feature allows some of these applications to work with this product. If the mechanism of Special Applications fails to make an application work, try setting your computer as the DMZ host instead.
-
Page 23: Miscellaneous Items
4.5.3 Miscellaneous Items IP Address of DMZ Host DMZ (DeMilitarized Zone) Host is a host without the protection of firewall. It allows a computer to be exposed to unrestricted 2-way communication for Internet games, Video conferencing, Internet telephony and other special applications. NOTE: This feature should be used only when needed. -
Page 24: Security Settings
4.6 Security Settings... -
Page 25: Packet Filter
4.6.1 Packet Filter Packet Filter enables you to control what packets are allowed to pass the router. Outbound filter applies on all outbound packets. However, Inbound filter applies on packets that destined to Virtual Servers or DMZ host only. You can select one of the two filtering policies: 1. - Page 26 For source or destination port, you can define a single port (80) or a range of ports (1000-1999). Add prefix "T" or "U" to specify TCP or UDP protocol. For example, T80, U53, U2000-2999. No prefix indicates both TCP and UDP are defined. An empty implies all port addresses. Packet Filter can work with Scheduling Rules, and give user more flexibility on Access control.
- Page 27 Others are all blocked. Example 2: (1.2.3.100-1.2.3.119) They can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are all allowed. After Inbound Packet Filter setting is configured, click the save button. Outbound Filter: To enable Outbound Packet Filter click the check box next to Enable in the Outbound Packet Filter field.
- Page 28 Example 1: (192.168.123.100-192.168.123.149) They are allowed to send mail (port 25), receive mail (port 110), and browse Internet (port 80); port 53 (DNS) is necessary to resolve the domain name. (192.168.123.10-192.168.123.20) They can do everything (block nothing) Others are all blocked.
- Page 29 Example 2: (192.168.123.100-192.168.123.119) They can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button.
-
Page 30: Domain Filter
4.6.2 Domain Filter Domain Filter let you prevent users under this device from accessing specific URLs. Domain Filter Enable Check if you want to enable Domain Filter. Log DNS Query Check if you want to log the action when someone accesses the specific URLs. Privilege IP Addresses Range Setting a group of hosts and privilege these hosts to access network without restriction. - Page 31 Example: In this example: 1. URL include “www.msn.com” will be blocked, and the action will be record in log-file. 2. URL include “www.sina.com” will not be blocked, but the action will be record in log-file. 3. URL include “www.google.com” will be blocked, but the action will not be record in log-file. IP address X.X.X.1~ X.X.X.20 can access network without restriction.
-
Page 32: Url Blocking
4.6.3 URL Blocking URL Blocking will block LAN computers to connect to pre-defined Websites. The major difference between “Domain filter” and “URL Blocking” is Domain filter require user to input suffix (like .com or .org, etc), while URL Blocking require user to input a keyword only. In other words, Domain filter can block specific website, while URL Blocking can block hundreds of websites by simply a keyword. - Page 33 In this example: 1.URL include “msn” will be blocked, and the action will be record in log-file. 2.URL include “sina” will be blocked, but the action will be record in log-file 3.URL include “cnnsi” will not be blocked, but the action will be record in log-file. 4.
-
Page 34: Mac Address Control
4.6.4 MAC Address Control MAC Address Control allows you to assign different access right for different users and to assign a specific IP address to a certain MAC address. MAC Address Control Check “Enable” to enable the “MAC Address Control”. All of the settings in this page will take effect only when “Enable”... - Page 35 Control table "Control table" is the table at the bottom of the "MAC Address Control" page. Each row of this table indicates the MAC address and the expected IP address mapping of a client. There are four columns in this table: MAC address indicates a specific client.
- Page 36 4.6.5 Miscellaneous Items Remote Administrator Host/Port In general, only Intranet user can browse the built-in web pages to perform administration task. This feature enables you to perform administration task from remote host. If this feature is enabled, only the specified IP address can perform remote administration. If the specified IP address is 0.0.0.0, any host can connect to this product to perform administration task.
- Page 37 Currently, the router can detect the following DoS attack: SYN Attack, WinNuke, Port Scan, Ping of Death, Land Attack etc. VPN PPTP/IPSec Pass-Through Please enable this feature, if you need to establish a PPTP or IPSEC connection that will pass through this device.
-
Page 38: Advanced Settings
4.7 Advanced Settings... -
Page 39: System Time
4.7.1 System Time Get Date and Time by NTP Protocol Selected if you want to Get Date and Time by NTP Protocol. Time Server Select a NTP time server to consult UTC time Time Zone Select a time zone where this device locates. Set Date and Time manually Selected if you want to Set Date and Time manually. -
Page 40: System Log
4.7.2 System Log This page support two methods to export system logs to specific destination by means of syslog(UDP) and SMTP(TCP). The items you have to setup including: IP Address for Syslog Host IP of destination where syslogs will be sent to. Check Enable to enable this function. -
Page 41: Dynamic Dns
4.7.3 Dynamic DNS To host your server on a changing IP address, you have to use dynamic domain name service (DDNS). So that anyone wishing to reach your host only needs to know the name of it. Dynamic DNS will map the name of your host to your current IP address, which changes each time you connect your Internet service provider. - Page 42 Password/Key You will get this information when you register an account on a Dynamic DNS server. Example: After Dynamic DNS setting is configured, click the save button.
-
Page 43: Snmp Setting
4.7.4 SNMP Setting In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a user the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events. Enable SNMP You must check either Local or Remote or both to enable SNMP function. If Local is checked, this device will response request from LAN. -
Page 44: Routing Table
4.7.5 Routing Table Routing Tables allow you to determine which physical interface address to use for outgoing IP data grams. If you have more than one routers and subnets, you will need to enable routing table to allow packets to find proper routing path and allow different subnets to communicate with each other. Routing Table settings are settings used to setup the functions of static. - Page 45 Example: Configuration on NAT Router Destination SubnetMask Gateway Enabled ˇ 192.168.1.0 255.255.255.0 192.168.123.216 ˇ 192.168.0.0 255.255.255.0 192.168.123.103 So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use the above table to determine that it had to go via 192.168.123.103 (a gateway), And if it sends Packets to 192.168.1.11 will go via 192.168.123.216 Each rule can be enabled or disabled individually.
- Page 46 4.7.6 Schedule Rule You can set the schedule time to decide which service will be turned on or off. Select the “enable” item. Press “Add New Rule”...
- Page 47 You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. The following example configure “ftp time” as everyday 14:10 to 16:20...
- Page 48 After configure Rule 1 Schedule Enable Selected if you want to Enable the Scheduler. Edit To edit the schedule rule. Delete To delete the schedule rule, and the rule# of the rules behind the deleted one will decrease one automatically. Schedule Rule can be apply to Virtual server and Packet Filter, for example:...
- Page 49 Exanple1: Virtual Server – Apply Rule#1 (ftp time: everyday 14:10 to 16:20) Exanple2: Packet Filter – Apply Rule#1 (ftp time: everyday 14:10 to 16:20).
-
Page 50: Toolbox
4.8 Toolbox... - Page 51 4.8.1 System Log You can View system log by clicking the View Log button...
- Page 52 4.8.2 Firmware Upgrade You can upgrade firmware by clicking Firmware Upgrade button.
- Page 53 4.8.3 Backup Setting You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. 4.8.4 Reset to default You can also reset this product to factory default by clicking the Reset to default button.
- Page 54 4.8.6 Miscellaneous Items MAC Address for Wake-on-LAN Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order to enjoy this feature, the target device must be Wake-on-LAN enabled and you have to know the MAC address of this device, say 00-11-22-33-44-55.
-
Page 55: Appendix A Tcp/Ip Configuration For Windows 95/98
This section introduces you how to install TCP/IP protocol into your personal computer. And suppose you have been successfully installed one network card on your personal computer. If not, please refer to your network card manual. Moreover, the Section B.2 tells you how to set TCP/IP values for working with this NAT Router correctly. - Page 56 5. Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click OK button to return to Network window. 6. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol.
- Page 57 A.2 Set TCP/IP Protocol for Working with NAT Router 1. Click Start button and choose Settings, then click Control Panel. 2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window. 3.
- Page 58 Select Obtain an IP address automatically in the IP Address tab. b. Don’t input any value in the Gateway tab.
- Page 59 Choose Disable DNS in the DNS Configuration tab. B. Configure IP manually Select Specify an IP address in the IP Address tab. The default IP address of this product is 192.168.123.254. So please use 192.168.123.xxx (xxx is between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field.
- Page 60 b. In the Gateway tab, add the IP address of this product (default IP is 192.168.123.254) in the New gateway field and click Add button. In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click Add button.
-
Page 61: Appendix B Faq And Troubleshooting
Reset to factory Default 1. Restore directly when the router power on First, hold the RESET button about 5 seconds(M1 will start flashing about 5 times),move away the hand. The RESTORE process is completed.
Need help?
Do you have a question about the UIS1400-C8 and is the answer not in the manual?
Questions and answers