Using The Accessories; Gfci Instructions - Kärcher K 280 M Operator's Manual

GFCI INSTRUCTIONS

Step 1
Plug the Ground
Fault Circuit Interrupter (GFCI)
into a working outlet.

USING THE ACCESSORIES

The pressure washer has two fully automatic pressure settings, depending on the wand or
nozzle installed.
High/low spray wand
must be positioned to the high pressure setting (+). To apply detergent, the wand must be
positioned to the low pressure setting (-).
Rotating spray wand
Wash brush
This brush
is ideal for
removing stubborn
dirt and stains from
finished surfaces.
Use with detergents only.
Step 2
Press "TEST", then
press "RESET" to assure proper
connection to power.
The Vario spray wand allows you to adjust the cleaning
pressure. To clean at maximum pressure, the Vario wand
This wand features a 0º pencil jet which rotates 360º for
maximum dirt cutting action, effectively increasing
cleaning performance up to 50%. This wand combines
the cleaning performance of a 0º pencil jet with the sur-
face coverage of a wide angle nozzle. Not recommend-
ed for soft materials, siding, painted surfaces, decks or
autos.
For higher pressure turn wand
collar in the plus (+) direction.
For lower pressure turn wand
collar in the minus (-) direction.
WARNING TO AVOID
SERIOUS INJURY,
NEVER POINT SPRAY
NOZZLE AT YOURSELF,
OTHER PERSONS
OR ANIMALS
Note:
The actual
appearance
of the GFCI
may be
different from
this
illustration.