Connecting A Mouse Or A Printer - Toshiba Portege 2010 User Manual

98
Expansion Options

Connecting a mouse or a printer

The computer will use the external monitor and disable the
built-in display panel.
If your external monitor can display high-resolution video
modes (greater than 800 x 600), you can take advantage of
this feature by changing the video mode in Display Properties
in the Control Panel.
Using both screens simultaneously
You can view information on the computer's built-in display
and an external monitor simultaneously. The size of the
display image on each screen depends upon the video mode.
To send information to both the built-in display panel and the
external monitor, change the Power On Display mode option.
To do this using the hot key:
1 Press
2 While holding down
the desired setting.
This hot key cycles through the settings in the following
order: built-in display only, external monitor only, and
simultaneous display.
3 Release the
HINT: Simultaneous mode works only with external monitors that
support 800 x 600 resolution and higher.
Connecting a mouse or a printer
For information on attaching a mouse or a printer, see
"Connecting a mouse" on page 44
on page
and simultaneously.
Fn F5
key.
Fn
44.
, press repeatedly until you get
Fn F5
or "Connecting a printer"