Deli Fresh Damper; Fresh Food Thermistors - GE PSC21MGM Technical Service Manual

3. Remove the upper water filter cover.
4. Unlock the upper opaque light cover tabs and
remove the cover.
5. Unlock the upper ductwork tabs and remove it.
6. Remove the Phillips head screws (8) for the
upper light assembly plastic bracket.
Screws Screws
Screws Screws
7. Pull the stainless steel light bracket down until
the wires are exposed and disconnect them.
8. Remove the Phillips head screws (2) for the
fresh food fan and damper cover and remove
the cover.
GEA00934
GEA00935
Screws Screws
GEA00936
9. Lay the fan and damper assembly against the
compartment and open the back cover.
10. Disconnect the wire connections and remove
the damper or fan.

Deli Fresh Damper

The deli fresh damper is located at the bottom of
the cold air ductwork. It allows the flow of cold air
to be adjusted to the deli fresh drawer.
1. Remove the deli fresh damper adjusting knob
and the lower light cover.
2. Remove the center ductwork by unlocking
upper and lower tabs. Double-sided tape is
applied to upper and lower areas.
3. Remove the damper Phillips head mounting
screws (3) and remove the damper.
Screws Screws Screws

Fresh Food Thermistors

The fresh food thermistors are located at the
upper and lower portions of the fresh food
compartment. They send temperature signals to
the processor.
– 21 –
GEA00938