Table of Contents
Advertisement
IIIII
Factory Default
If you forget your password, please follow the steps to revert back to default value.
•
Remove the power and ethernet cable. Press and hold the button as the picture
below.
•
Connect power to the camera again, and do not release the button during the
system booting.
•
It will take around 30 seconds to boot the camera.
•
Release the button when camera finishes proceed.
•
Plug in the ethernet cable. Re-login the camera using the default IP
(http://192.168.1.200), and user name (admin), password (admin).
56
Advertisement
Table of Contents
