IIII I/O Configuration
1.
I/O Connection
a.
Please connect the GND & DO pin to the external relay (buzzer) device.
Please connect the GND & DI pin to the external trigger device.
b.
I/O PIN definition
•
GND (Ground): Initial state is LOW
•
DO (Digital Output): DC 5V
•
DI (Digital Input): Max. 50mA, DC 5V
2.
I/O Setup
a.
Click I/O Setting from the system setup page via IE, and check "Out1" to
enable I/O signal.
b.
Output Test
After the external input and output hardware is installed, you can use the
"Relay Out" bottom on the live video page to test if DO / Relay Out works.
(i)
OnOff Switch mode:
Click "ON", the camera will trigger the external output devise for 10
54