Assigning A Clerk - Casio TE-2400 User Manual

Basic Operations and Setups

Assigning a clerk

ALL
Mode switch
Clerk button
You can assign the clerk or cashier using the six buttons located below the display panel.
Clerk secret number key
When the cash register is programmed to use clerk secret numbers for clerk or cashier assignment, the clerk
buttons are not functional.
Clerk sign on
Signing clerk 1 on:
Signing clerk 2 on:
Signing clerk 15 on:
• If you do not want the clerk secret number to be shown on the display, press
Clerk sign off
Signing clerk off:
(except PGM mode)
• The current clerk is also signed off whenever you set the mode switch to OFF position.
Important!
• The error code "E008" appears on the display whenever you try to perform a registration, a read/
reset operation without signing on.
• A clerk cannot sign on unless other clerk is signed off.
• The signed on clerk is also identified on the receipt/journal.
32
E
You can assign clerks by using clerk button or by clerk secret number.
The method you of assigning clerk depends on the programming of your cash register.
OPERATION
1 6 o
2 o
6
15 6 o
Clerk secret number
(1 ~ 15 is set as default.)
OPERATION
0 6 o
RECEIPT
* COMMERCIAL MESSAGE
REG 03-06-2006 11:58
C01 MC#01 000123
1 DEPT01 T1 •1.00
*
— Clerk name/machine No./consecutive No.
o
before entering the number.