Sharp CD-C1W Service Manual page 10

CD-C1W,CP-C1W
Push the pawl of disc tray
with a proper screwdriver.
Back surface
Pawl
Disc Tray 3
Disc Tray 2
(After drawing out the disc trays 1, 2, and 3, turn
over the mechanism unit, push two pawls, and
remove successively the three disc trays from the
mechanism unit, starting with the disc tray 3.
Thereby the CD mechanism shown in the right
figure can be removed.)
CP-C1W
(A4)x2
ø4x20mm
(A3)x4
ø4x25mm
(A2)x4
(A1)x1
Figure 10-2
(R7) x2
ø2 x6mm
(R8) x1
Pawl
Disc Tray 1
Driver
Speaker
Box
Front Panel
(R1) x2
(R5) x1
ø2 x7mm
ø2.6 x12mm
Spring
(R2) x1
Normal state
Disc Tray 1
Disc Tray 2
(R4) x3
Disc Tray 3
Figure 10-1
Tweeter
Super
Tweeter
(B1)x2
Panel
ø3x10mm
(B5)x4
ø4x12mm
– 10 –
(R3) x1
(R6) x1
(R9) x1
CD
Mechanism
(R10) x4
ø2.6 x10mm
Turn clockwise the
main cam to raise the
CD mechanism up to
the uppermost position.
Press in turns the arrow
1
parts, starting with the
2
uppermost one, to
3
withdraw the disc trays
(B3)x1
ø3x10mm
(B4)x2
ø3x10mm
Front
Woofer
Figure 10-3
Push
.
Pawl
(B2)x2
Speaker
Box