Display Settings - Fujitsu Siemens Computers CELSIUS Mobile H Easy Manual

1 = Touchpad
Moving the pointer
Ê
Move your finger on the touchpad.
Selecting
Ê
Tap the touchpad once or press the left button once.
Executing a command
Ê
Tap the touchpad twice or press the left button twice.
Dragging an object
Ê
Move the pointer to the item you wish to select.
Ê
Select the desired object, and leave your finger on the touchpad.
Ê
Drag the object to the desired position.
Ê
Lift your finger from the touchpad.

Display settings

Setting the desktop area
You can change the screen resolution under Start - Settings- Control Panel - Display - Settings and then
selecting from the Resolution field.
Adjusting the font size
Under Start - Settings - Control Panel - Display - Settings you can choose between a larger and a smaller
font in the Font size field.
Setting the display brightness
You can adjust the brightness of your LCD screen with the keys [Fn] and [F11] or [Fn] and [F12]: With
[Fn] and [F12] you adjust the screen darker, and with [Fn] and [F11] brighter.
Synchronising the display on the LCD screen and an external monitor
Your notebook supports the simultaneous display on the LCD monitor and an external monitor. If the
picture does not appear correctly on the LCD monitor, press the key combination [Fn] + [F10] several
times, or switch the external monitor off and then on again. This achieves good picture synchronisation.
Adjusting the speed of the mouse pointer
You can change the speed of the mouse pointer under Start - Settings - Control Panel - Mouse and
clicking on the Motion tab.
A26391-Kyyy-Z120-1-7619
2 = Touchpad buttons
!
25