Overview; Feature Summary - Intel YA810E Technical Product Specification

Intel Desktop Board YA810E Technical Product Specification

1.1 Overview

1.1.1 Feature Summary

Table 1 summarizes the YA810E board's major features.
Table 1.

Feature Summary

Form Factor
Processor
Memory
Chipset
Direct AGP Video
Audio
I/O Control
Peripheral Interfaces
BIOS
LAN Controller
Instantly Available PC
NOTE
The YA810E board is designed to support only USB-aware operating systems.
For information about
The board's compliance level with ACPI, Plug and Play, and SMBIOS
12
FlexATX (9.0 inches by 7.5 inches)
Support for either an:
• Intel
® ®
Pentium III processor with 512 KB L2 cache (in an FCPGA package)
• Intel
® ™
Celeron processor with 128 KB L2 cache (in a PGA package)
• Two 168-pin dual inline memory module (DIMM) sockets
• Supports up to 512 MB of 100 MHz non-ECC synchronous DRAM (SDRAM)
• Support for serial presence detect (SPD) and non-SPD DIMMs
®
Intel 810E chipset, consisting of:
• Intel
®
82810E Graphics/Memory Controller Hub (GMCH)
• Intel
®
82801AA I/O Controller Hub (ICH)
• Intel
®
82802AB 4 Mbit Firmware Hub (FWH)
• Intel 82810E DC-133 GMCH
• VGA port connector on back panel
Audio Codec '97 (AC'97) compatible audio subsystem, consisting of the
following:
• Intel 82801AA ICH (AC link output)
• Analog Devices AD1881 analog codec
LPC47B277 Low Pin Count (LPC) I/O controller
• Three back-panel mounted universal serial bus (USB) ports
• Two IDE interfaces with Ultra DMA support
• Intel/AMI BIOS stored in an Intel 82802AB 4 Mbit firmware hub (FWH)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and
Play, and SMBIOS
®
Intel 82559 local area network (LAN) controller
• Support for PCI Local Bus Specification , Revision 2.2
• Suspend-to-RAM support
• Wake from USB ports
Refer to
Table 3, page 16