Doro PhoneEasy 623 Manual page 36

•
Any key
any button (exemption
3. Press OK to confirm.
Call setup
This menu may vary depending on network support and subscription.
Contact your service provider for more information.
Caller ID
Display or hide your phone number on the recipient's phone when you
call.
1. Press Menu
2. Select Caller ID:
•
Set by network to use default setting by the network.
•
Hide ID to never show your number.
•
Send ID to always show your number
3. Press OK to confirm.
Call waiting
You can handle more than one call at a time. An alert tone will be heard
if there is an incoming call while talking. To put the current call on hold
and answer the incoming call, press Options
1. Press Menu
2. Select Call waiting:
•
Activate to enable call waiting.
•
Deactivate to disable call waiting.
•
Query status to display if call waiting is active or not.
3. Press OK to confirm.
Call divert
You can divert calls to an answering service or to another phone number.
Set up which calls should be diverted. Select a condition and press OK,
then select Activate, Deactivate or Query status (see Call waiting, p.30)
for each.
1. Press Menu
2. Select Call divert:
•
Voice calls to divert all voice calls.
English
On to be able to answer incoming calls by pressing
Settings Calls
Settings Calls
Settings Calls
30
).
Call setup.
Answer.
Call setup.
Call setup.