Front View and Controls
1
Item
1
IR (Infrared Receiver)
2
POWER LED
3
I/O POWER ON/OFF
4
Touch Control Panel
a
MENU
b
SOURCE
c
VOL
d
CH
e
2
Description
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Illuminates red when the TV is in standby mode and flashes for a few seconds when
you turn on the TV. The LED will then remain steady red whilst the TV is switched on.
Switch on the I/O POWER ON/OFF switch to turn the TV to standby mode.
Touch the touch control panel once to activate it (indicators on the touch control
panel will illuminate), and then press the touch sensitive controls to execute. The touch
control panel will automatically deactivated if untouched for several seconds.
Displays the OSD (on screen display) menu.
Select among the different input signal sources:
DTV / TV / SCART / AV / Component / VGA / HDMI1 / HDMI2 / HDMI3 / HDMI4 / DMP
Adjust the volume.
Select and adjust a setting in the OSD menus.
Select a channel.
Select a sub-menu of the OSD menu.
Switch the TV on from standby.
Switch the TV back to standby.
4
I/O
3
a
b
c
d
e
GB-5