DTV Manual Install
Allows you to make manual fine tuning adjustments of the channel under DTV mode.
1.
Press the
Menu button and then press the
Channel menu.
2.
Press the
button to select DTV Manual Install and then press the OK
button or the
button to confirm.
3.
The DTV Manual Install screen will pop up. Press the
the desired UHF channel and then press the OK button to commence the
search of that channel. When the signal has been tuned, the picture and
signal strength will be displayed on the screen.
4.
Press the
Menu button to return back to the previous menu.
5.
Exit button to exit the menu.
Press the
ATV Manual Install
Allows you to make manual fine tuning adjustments if the channel reception is poor under TV mode.
1.
Press the
Menu button and then press the
Channel menu.
2.
button to select ATV Manual Install and then press the OK
Press the
button or the
button to confirm.
3.
The ATV Manual Install screen will pop up. Use the
following options and the
Storage To
Preset the channel number.
Colour System
Select TV colour system between: PAL / SECAM.
System
Select the sound system: I / BG/ DK / L (for SECAM).
Current CH
Display current channel number.
Search
Press the
Press the
Fine-Tune
adjustments.
Skip
Skip the current channel.
Frequency
Display the current tuned frequency.
4.
After finishing all the manual tuning adjustments, press the
save your settings.
5.
Menu button to return back to the previous menu.
Press the
6.
Exit button to exit the menu.
Press the
buttons to select the
buttons to select
buttons to select the
buttons to select the
buttons to adjust the setting.
buttons to start the manual tuning.
buttons to make manual fine tuning
RED button to
Programme Edit
CI Information
OK
Enter
Select
Return
Programme Edit
CI Information
OK
Enter
Select
Return
GB-19