DT Research DT395 Basic Operation Manual

DT Research DT395 Basic Operation Manual

Mobile pos tablet

Advertisement

Quick Links

DT395
Federal Communication Commission Interference
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiated radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation if this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Operation on the 5.15-5.25GHz frequency band is restricted to indoor use only.
The FCC requires indoor use for the 5.15-5.25GHz band to reduce the potential for
harmful interference to co-channel Mobile Satellite Systems.
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2013, DT Research, Inc. All Rights Reserved.
DT Research is a registered trademark of DT Research, Inc.
8
ENGLISH
signage dtri com
http://www.dtresearch.com
BOG041513DT395ENG
Mobile POS Tablet
DT395
BASIC OPERATION GUIDE
ENGLISH

INTRODUCTION

Thank you for acquiring the latest addition to DT Research's line of mobile tablets— the
DT395. Featuring an IP65-rated, slim yet robust enclosure, the two-pound DT395 with
9" TFT display is powered by the Intel
Atom™ dual core processor, offering optimal
®
combinations of performance and power savings.
The DT395 is available with Windows
Embedded Standard 7, Windows
®
operating systems. Each software operating system features web browser, client/server
computing software, media player, accessories, and applications support.

PACKAGE CONTENTS

DT395 with Internal Battery Pack, Stylus and Bumpers
AC-DC Power Adapter with Power Cord
Basic Operation Guide
Handstrap
Major options, depending on configuration:
Desktop Charging Cradle with DC-in Power Jack and Ethernet/ USB Ports
External Battery Pack and Battery Charger Kit
Vehicle/ Wall Mount Cradle
* If your DT395 contains camera, 3G or scanner module, please refer to the Tablet Modules basic
operation guide for detailed operation.
7 Pro or Linux
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DT395 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DT Research DT395

  • Page 1 External Battery Pack and Battery Charger Kit • Vehicle/ Wall Mount Cradle * If your DT395 contains camera, 3G or scanner module, please refer to the Tablet Modules basic operation guide for detailed operation. DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com...
  • Page 2 A DT395 typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may Calibrate touch screen before logging in to operating system connect to other wireless devices or access points. If your DT395 does not come with Change display orientation (portrait/ landscape) (default)
  • Page 3 To activate the DT395, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT395 in Standby mode, push and quickly release the Wireless Networking Power Button.
  • Page 4 The Cradles offer the following interfaces: a DC-in port (Button 7) on the front of the DT395. Users can increase or decrease the brightness level for the AC-DC adapter, an Ethernet port, a VGA output and USB ports. Always seat the of the LCD panel by moving the slider to adjust the brightness of your display.

This manual is also suitable for:

Dt3 5 series

Table of Contents