Video Input; Configured Devices - Sony NSX-24GT1 Help Manual

Did You Know
Home
Keypad
Search
Using Applications
Internet
TV
Playback
Connection
Settings
Network

Video Input

AV Receiver
Picture & Sound - Picture
Picture & Sound - Sound
TV Settings
Search
Applications
Input Device
Accounts & Sync
Privacy & Safety
Storage
Date, Time & Location
Accessibility
About
Parts & Controls
Troubleshooting / FAQ
Others
Media Remote
NSX-24GT1/NSX-32GT1/NSX-40GT1/NSX-46GT1
Top Page > Settings > Video Input
Video Input

Configured devices

HDMI settings
Built-in tuner settings
Video/Component selection
Configured devices
You can select the device to control or to set as the tuner.
Press Fn + 1 and select [Video Input] - [Configured devices], then select the device you want to
set up.
List of configured devices
You can make settings for devices shown in this list, and control them with the Keypad. The built-
in tuner and DISH Network enhanced DVR integration devices are shown in the list of available
sources when removed.
HDMI1 - 4,
Video/Component:
List of available sources
To add a device, select it from the list.
Add device manually:
To add/remove a device compatible with the Control for HDMI function:
When you connect a device compatible with the Control for HDMI function, the device is listed as
a configured device and the name appears automatically in the list of configured devices. To
remove a device compatible with the Control for HDMI function, disconnect the device. The device
name disappears from the list of configured devices.
To hide channels
Select [Built-in tuner] from the list of configured devices, then select [Edit channel list]. Check the
box of the channel you want to hide.
To select the device to launch using the TV key
Select the device to use as a tuner from the list of configured devices, then select [Make default
TV device]. Only one device can be set as the default at a time.
A mark appears next to the device name in the list of configured devices. Press TV to launch the
device.
Search Help Guide
FAQ
You can assign a name to the input.
Select the input you want to set. To assign a
name, either select [Manage inputs] - [Label] and
choose a label, or choose [Edit] to create a
custom label and then input characters.
You can add a device you want to control using
the IR Blaster.
66