Sony NSX-24GT1 Help Manual page 57

Did You Know
Home
Keypad
Search
Using Applications
Internet
TV
Playback
Connection
Connecting Devices
Preparing to Control an AV
Receiver
Preparing to Control Other
Devices
Advanced Network
Connection
Settings
Parts & Controls
Troubleshooting / FAQ
Others
Media Remote
NSX-24GT1/NSX-32GT1/NSX-40GT1/NSX-46GT1
Top Page > Connection > Preparing to Control an AV Receiver
Preparing to Control an AV Receiver
If an AV Receiver is compatible with Control for HDMI
If an AV Receiver is not compatible with Control for HDMI
If an AV Receiver is connected to the TV and AV Receiver Setup is completed in the Initial Setup,
you can control the AV Receiver using the Keypad.
To control the AV Receiver, press AMP to light up the AMP indicator and activate AV Receiver
control. Point the Keypad to the TV, and use the following keys (keys with orange dots):
(BD/EXT): turns on/off the AV Receiver
INPUT: changes the input of the AV Receiver
VOL: changes the volume up (+) or down (−) of the AV Receiver
MUTING: silences the volume of the AV Receiver
Note
The AMP indicator turns off after 30 seconds, or if you press AMP while the AMP indicator is
on. This ends control of the AV Receiver.
Tip
Press Fn + AMP, the AMP indicator turns on for two seconds. This allows you to continuously
control the AV Receiver using
press Fn + AMP until the AMP indicator blinks four times.
Return to Top
If an AV Receiver is compatible with Control for HDMI
In addition to the above controls, you can turn on/off the AV Receiver simultaneously with the TV
using the Keypad. However, the Control for HDMI function may not be available with some AV
Receivers. In such case, you need to connect an IR Blaster.
Connect the TV to the AV Receiver with HDMI connections.
1.
Search Help Guide
FAQ
(ON/STANDBY) /INPUT/VOL. To return to normal control,
57