Toyota 2010 Camry Quick Reference Manual page 464

Hide thumbs Also See for 2010 Camry:
Table of Contents

Advertisement

(When the condition becomes normal, the system will work properly.)
If electronic devices or facilities using similar radio wave frequencies
are nearby.
If a radio set at similar frequencies is in use in the vehicle.
If a window tint that affects the radio wave signals is installed
If there is a lot of snow or ice on the vehicle, in particular around the
wheels or wheel housings.
If non-genuine Toyota wheels are used. (Even if you use Toyota
wheels, the tire pressure warning system may not work properly with
some types of tires.)
If tire chains are used
Vehicles without compact spare tire
If the spare tire is in a location subject to poor radio wave signal
reception.
If a large metallic object which can interfere with signal reception is
put in the luggage room.
If the tire pressure warning light comes on after blinking for 1
minute frequently
If the tire pressure warning light comes on after blinking for 1 minute fre-
quently when the "ENGINE START STOP" switch or engine switch is
turned ON, have it checked by your Toyota dealer.
Customization that can be configured at Toyota dealer
The vehicle speed linked seat belt reminder buzzer can be disabled.
(Customizable features →P. 510) However, Toyota recommends that the
seat belt reminder buzzer be operational to alert the driver and front passen-
ger that the seat belts are not fastened.
CAUTION
If the tire pressure warning light comes on
Be sure to observe the following precautions. Failure to do so could
cause loss of vehicle control and result in death or serious injury.
Stop your vehicle in a safe place as soon as possible. Adjust the tire
inflation pressure immediately.
5-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
5
441

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents