Advertisement
Step7 Assemble The Weight Plates
1)Insert both the Guide Rods(#15) into the Main Upright
(#1).
2)Slide the Weight Rubber Bumper(#31)down onto each
Guide Rod(#15). as shown below.
3)Carefully begin sliding the Weight Plate one by one in
sequence:#39,#38,#41.
4)Align both top ends of the Guide Rods(#15) to the Main
Upright(#1) and secure them using:
Make sure that Washers(#60)and Spring Washers
(#63) are on the top side.
Note
two Allen Bolts(#50) M10×70
two Washers(#60)
two Spring Washers(#63)
two Rubber Caps(#68)
1 2
Φ
11× 20×1.5
Φ
10
Φ
Advertisement
