Handset Locator - AT&T CL83101 Quick Start Manual

Quick reference guide - telephone base
CANCEL
While in a menu, press to cancel an operation,
back up to the previous menu or exit the menu
display.
Press and hold to go back to idle mode.
When the telephone base is ringing, press to
mute the ringer temporarily.
q
CID
Press to display the caller ID history when
the phone is not in use.
Press to scroll down while in menus and lists.
While entering names and numbers, press to
move the cursor to the left.
IN USE indicator
On when the telephone is in use, or when the
answering system is answering an incoming call.
On when a handset is being registered.
Flashes when there is an incoming call or when
all handsets are being deregistered.
Flashes when another telephone is in use on the
same line.

/HANDSET LOCATOR

While the phone is idle, press to
page all handsets.
REDIAL/PAUSE
Press repeatedly to view the last
0 numbers dialed.
While entering numbers,
press and hold to insert a dialing
pause.
q/VOLUME/p
During message playback or call
screening, press to adjust the listening
volume.
While in idle mode, press to adjust the
base ringer volume.
When on a call, press to adjust the
listening volume.
MENU/SELECT
When the telephone base is not in use, press
to show the menu.
While in the menu, press to confirm or save an
entry or setting.
p
DIR
Press to display the directory when the phone is
not in use.
Press to scroll up while in menus and lists.
While entering names and numbers, press to
move the cursor to the right.
FLASH
During a call, press to answer an incoming call
when you receive a call waiting alert.
PTT
Press to initiate a one-to-one or
one-to-group broadcast.
Press and hold to broadcast to a
group of system devices.
6
MIC
Microphone