Gigabyte GA-Z170X-Gaming 7 User Manual page 77

Step 3:
Press <Enter> under the Select Disks item. In the SELECT DISKS box, press <Tab> on the hard drive you want
to use for the master drive and press <Space> on the hard drive you want to use for the recovery drive. (Make sure
the recovery drive has equal or larger capacity than the master drive.) Then press <Enter> to confirm (Figure 17).
ID Drive Model
M1 Hitachi HDS72105
R2 Hitachi HDS72105
[ hi ]-Change
Step 4:
Under Sync, select Continuous or On Request (Figure 18). When set to Continuous, changes made to the
data on the master drive will be automatically and continuously copied to the recovery drive when both hard
drives are installed in the system. On Request allows users to update data from the master drive to the recovery
drive manually using the Intel
users to restore the master drive to a previous state.
[ hi ]-Change
Step 5:
Finally press <Enter> on the Create Volume item to begin creating the Recovery Volume and follow the on-
screen instructions to complete.
Intel(R) Rapid Storage Technology - Option ROM - 14.0.0.2209
Copyright (C) Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name : Volume0
RAID Level : Recovery
Disks :
[ SELECT DISKS ]
Strip Size :
Capacity : 223.6 GB
Serial #
JP1532ER04EJTK
JP1532ER046AGK
Choose the RAID level:
RAID0: Stripes data (performance).
RAID1: Mirrors data (redundancy).
Select 1 Master and 1 Recovery disk to create volume.
Recovery: Copies data between a master and a recovery disk.
RAID10: Mirrors data and stripes the mirror.
[ hi ]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done
RAID5: Stripes data and parity.
[TAB]-Next
Rapid Storage Technology utility in the operating system. On Request also allows
®
Intel(R) Rapid Storage Technology - Option ROM - 14.0.0.2209
Copyright (C) Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name : Volume0
RAID Level : Recovery
Disks :
Strip Size : N/A
Capacity : 0.0 GB
Select a sync option:
On Request: volume is updated manually
Continuous: volume is updated automatically
[TAB]-Next
Select Disks
128KB
Create Volume
[ HELP ]
[ESC]-Previous Menu
Figure 17
Select Disks
Sync : Continuous
Create Volume
[ HELP ]
[ESC]-Previous Menu
Figure 18
- 77 -
Size Status
465.7GB Non-RAID Disk
465.7GB Non-RAID Disk
[ENTER]-Select
[ENTER]-Select
Configuring a RAID Set