Service Information For Eeprom Ic Setting(Vcr) - LG V9120W Service Manual

SERVICE INFORMATION FOR EEPROM IC SETTING(VCR)

EEPROM option code No. setting
NAME HEX
OPT0 00
OPT1 00
OPT2 00
OPT3 00
OPT4 00
OPT5 00
12/26 - 00
ID : LG
VERSION : 05
DATE : 02.17.05
MODEL NAME
V9120W OPT0
OPT1
OPT2
OPT3
OPT4
OPT5
WR : OK I : EXIT MOVE : F G
EDIT : DE
BINARY
00000000
00000000
00000000
00000000
00000000
00000000
V00 <--- µ-COM Ver.
ROM
Correction Ver.
HEX BINARY
00 00000000
00 00000000
64 00000000
C1 00000000
4D 00000000
4A 00000000
EEPROM option code No. setting procedure
1. DETECT NEW EEPROM (OPTION EDIT
SCREEN)
- Eeprom EDIT screen automatically appears if
replacing Eeprom.
- Setup option data using the cursor Up/Down key
of a remote control.
(Setup upon BOM depending on OPT0~OPT5
model)
• Since an initial remote control is set to LG for LG
model, appropriately set optiona data using the
cursor Up/Down key.
2. EEPROM WRITED AND EEPROM INITIAL
- Writes data on EEPROM by using REMOCON
"OK" + FRONT PLAY KEY FOR MORE THAN 5
SECONDS.
3. PG ADJUST
1) Payback the SP standard tape
2) Press the "OK" key on the Remote controller
and the "PLAY" key on the Front Panel the
same time, then it goes in to Tracking initial
mode.
3) Repeat the above step(No.2), then it finishes
the PG adjusting automatically.
4) Stop the playback, then it goes out to PG
adjusting mode after mony the PG data.
4. BUYER SELECTION
- Font ejection key + open/close key for more than
5 seconds.
- Option code is displayed in TV
- First byte of OPTO is changed whenever front
eject key + open/close key.
- Philips remote conroller No.9.
1-5